MiFare Classic (13.56MHz RFID/NFC) Clear Tag
MiFare Classic (13.56MHz RFID/NFC) Clear Tag
Catégories
- Domotique
- Robots Jouets
- Robots Hobby
- UAVs et Drones
- Robots Pros
-
Robotique
- Arduino
- Microcontrôleurs
- Outils de développement
- Programmateurs
- Shields
- Capteurs
- Sans-fil
- Afficheurs LCD/OLED
- LilyPad
- Contrôleurs de Moteurs
- Moteurs & Réducteurs
- Servomoteurs
- Alimentations & Régulateurs
- Roues & Chenilles
- Bras
- Interfaces
- Breakout Boards
- Prototypage
- Reconnaissance vocale
- Accessoires
- Quincaillerie
- Electronique
- Kits
- Outillage
Newsletter
Les clients qui ont acheté ce produit ont également acheté...
This is a blank MiFare Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired. This one is clear! The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica) They are tested and work great with our PN532 NFC/RFID board! These chips can store up to 1 KB of data in EEPROM divided into banks, and can handle over 100,000 re-writes. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another.
Panier
article
(vide)
Nouveaux produits
Aucun nouveau produit à l'heure actuelle